Skip to main content

Product Engineer II at Cadence Design Systems

Hello Dear Readers, Cadence Design Systems has a vacancy for a Product Engineer II role. Cadence is a pivotal leader in electronic design, building upon more than 30 years of computational software expertise. The company applies its underlying Intelligent System Design strategy to deliver software, hardware and IP that turn design concepts into reality.  Cadence customers are the world’s most innovative companies, delivering extraordinary electronic products from chips to boards to systems for the most dynamic market applications including consumer, hyperscale computing, 5G communications, automotive, aerospace industrial and health. The Cadence Advantage: The opportunity to work on cutting-edge technology in an environment that encourages you to be creative, innovative, and to make an impact. Cadence’s employee-friendly policies focus on the physical and mental well-being of employees, career development, providing opportunities for learning, and celebrating success in recog...
Post a Comment

SOC Design Engineer at Qualcomm

Hello Dear Readers,

Currently, at Qualcomm Bangalore vacancy for SOC Design Engineer role.

As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements.

Minimum Qualifications:

  • Bachelor's degree in computer science, Electrical/Electronics Engineering, Engineering, or related field.

Preferred Qualifications:

  • Master's degree in computer science, Engineering, Information Systems, or related field.
  • 1+ year of experience with circuit design (e.g., digital, analog, RF).
  • 1+ year of experience utilizing schematic capture and circuit simulation software.
  • 1+ year of experience with hardware design and measurement instruments such as oscilloscopes, spectrum analyzers, RF tools, etc.

Principal Duties and Responsibilities:

  • Applies Hardware knowledge to assist in the planning, optimization, verification, and testing of electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems.
  • Provides support for the integration of features and functionality into hardware designs in line with proposals or roadmaps.
  • Assists in conducting simulations and analyses of designs as well as with the implementation of designs with the best power, performance, and area.
  • Collaborates with team members to assist in the implementation of new requirements and incorporation of the latest test solutions in the production program to improve the yield, test time, and quality.
  • Assists in the evaluation, characterization, and development of manufacturing solutions for leading edge products in processes and bring up product to meet customer expectations and schedules.
  • Assists in the evaluation of reliability for materials, properties, and techniques and brings innovation, automation, and optimization to maximize productivity.
  • Assists in the assessment of common design features to identify potential flaws, compatibility issues, and/or compliance issues.
  • Writes technical documentation for Hardware projects.

Level of Responsibility:

  • Works under supervision.
  • Decision-making affects direct area of work and/or work group.
  • Requires verbal and written communication skills to convey basic, routine factual information.
  • Tasks require multiple steps which can be performed in various orders; some planning, problem-solving, and prioritization must occur to complete the tasks effectively.


Comments

Post a Comment

Popular posts from this blog

SDC (Synopsys Design Constraints) contents part 4

Today, we will be discussing the remaining constraints mentioned in the SDC, which pertain to timing exceptions and design rules. This is the final part of the SDC contents. This is going to be interesting, especially with multicycle paths. Take time to read and try to comprehend. 10. set_max_transition     By setting max transition value, our design checks that all ports and pins are meeting the specified limits mentioned in SDC. If these are not satisfied then timing report will give DRVs (design rule violations) in terms of slack. This is specified as               set_max_transition 0.5  UBUF1/A setting maximum limit of 500ps on pin A of Buffer1. 11. set_max_capacitance     This is same as max transition, setting the maximum capacitance value. if our design not meeting this value then violation will occur. This will also reports under design rule violations in terms of slack.     set_max_capacitance 0.7 [all_...
1 comment
Read more

Apprenticeship CAI at MediaTek Bangalore

Hello Dear Readers,   Currently at MediaTek Bangalore vacancy for an Apprenticeship CAI role. Job Description: B.Tech degree in Electrical/Electronics Engineering with a strong educational background in Digital circuit design Experience in physical design of high performance design with frequencies > 2 Ghz. Experienced in hierarchical design, budgeting, multiple voltage domains and multiple clock domains. Strong skills with Cadence Encounter. Solid understanding of STA and timing constraints. Experienced in working on advanced process nodes (16nm). Strong expertise in Physical Verification to debug LVS/DRC issues at the block level. Requirement: B.Tech degree in Electrical/Electronics Engineering with strong educational background in Digital circuit design Experience in physical design of high performance design with frequencies > 2 Ghz. Experienced in hierarchical design, budgeting, multiple voltage domains and multiple clock domains. Strong skills with Cadence Enc...
Post a Comment
Read more

IC Physical Design (PnR) at Ulkasemi

Hello Dear Readers,   Ulkasemi  has a vacancy for an IC Physical Design (PnR) role. Job Overview: As a full-time Trainee Engineer, the individual will be working on IC Physical Design implementation from RTL to GDSII to create design databases ready for manufacturing with a special focus on power, performance & area optimization with next-generation state-of-the-art process technologies. Job Responsibilities: Perform physical design implementation which includes Floor planning, Power Planning, Clock Tree Synthesis, Place and Route, ECO, Logic Equivalence checks Timing analysis, physical & electrical verification, driving the sign-off closure meeting schedule, and design goals Develop flow, methodologies, and automation scripts for various implementation steps Follow the instructions, compile documents, prepare deliverables, and report to the team lead Should remain up to date with the latest technology trends Educational Qualification:   B.Sc/M.Sc   in EEE or...
Post a Comment
Read more